Safety Inspector-Anzsco :312611

SKILL LEVEL 2

sol Skilled Occupation List no
csol Consolidated Sponsored Occupation List yes
rsmsol Regional Sponsored Migration Scheme Occupation List yes
lmtr Labour Market Testing Requirement no
State Capital Visa subclass 190 Visa subclass 489 Visa subclass 189
ACT Australian Capital Territory Canberra
NSW New South Wales Sydney
NT Northern Territory Darwin
QLD Queensland Brisbane
SA South Australia Adelaide
TAS Tasmania Hobart
VIC Victoria Melbourne
WA Western Australia Perth

ANZSCO 312611: SAFETY INSPECTOR


Major Group: 3 - Technicians and Trades Workers | Sub-Major Group: 31 - Engineering, ICT and Science Technicians | Minor Group: 312 - Building and Engineering Technicians | Unit Group: 3126 - Safety Inspectors

Description: Inspects machines, equipment, working conditions and public places to ensure compliance with government and industry standards and regulations, in relation to occupational health and safety. Registration or licensing may be required.

Skill Level 2 : Occupations at Skill Level 2 have a level of skill commensurate with one of the following:

- NZ Register Diploma or 
- AQF Associate Degree, Advanced Diploma or Diploma.

At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

Specialisations
  • Boilers and Pressure Vessels Inspector
  • Gas Examiner
  • Lifts and Cranes Inspector
  • Mines Inspector
  • Occupational Health and Safety Inspector
Specialisation titles are any commonly used titles which refer to a subset of jobs belonging to the occupation designated in the principal title. These jobs involve the performance of specialised tasks rather than the broader range of tasks usually performed in the occupation.

UNIT GROUP 3126: SAFETY INSPECTORS


Description: Inspect machines, equipment, working conditions and public places to ensure compliance with government and industry standards and regulations, in relation to occupational health and safety.

Skill Level: Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below.

- In Australia:

AQF Associate Degree, Advanced Diploma or Diploma (ANZSCO Skill Level 2)

- In New Zealand:

NZ Register Diploma (ANZSCO Skill Level 2)

At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

Registration or licensing may be required.

Tasks
  • examining equipment specifications, and inspecting and testing machines, equipment and clothing to ensure compliance with safety standards and serviceability
  • inspecting factories and other work sites to ensure compliance with government and industry standards and regulations
  • observing workers to ensure protective devices are being utilised according to regulations and that combustible and other hazardous materials are used and stored in accordance with approved procedures
  • conducting tests in work areas to detect toxic fumes, explosive gas-air mixtures and other work hazards
  • ensuring fire prevention equipment and other safety supplies, such as first aid kits, stretchers and blankets, conform to standards
  • assisting in conducting safety meetings and campaigns, and organising training in general safety principles in keeping with regulations
  • advising organisations on ways to comply with occupational health and safety legislative requirements
  • investigating incidents and fatalities, to determine causes and to collect evidence of non-compliance with occupational health and safety legislation